To convert degrees to radians, multiply by \( \frac{\pi}{180} \); to convert radians to degrees, multiply by \( \frac{180}{\pi} \). Both rules come from one fact: a half turn is \( 180^\circ = \pi \) radians. One radian is the angle at the center of a circle that cuts off an arc exactly as long as the radius, about \( 57.3^\circ \). After this lesson you will be able to switch between degrees and radians in both directions, know the common angles such as \( \frac{\pi}{6} \) and \( \frac{3\pi}{4} \) by heart, read exact trig values in radians, find coterminal angles, compute arc length and sector area with \( s = r\theta \) and \( A = \frac{1}{2}r^2\theta \), and work with angular speed.
What is a radian?
Degrees split a full turn into 360 equal parts. That number is a historical choice, convenient because 360 has many divisors, but it has nothing to do with the geometry of a circle. Radians measure an angle by the circle itself.
Because \( \theta = \frac{s}{r} \) is a length divided by a length, the size of the circle does not matter: a bigger circle has a longer arc and a longer radius in the same proportion. That is also why radians often appear with no unit at all. When you see \( \sin 2 \) or an angle written as \( \frac{\pi}{3} \) with no degree sign, it means radians. Written with a unit, it is "rad".
Why is a full turn 2π radians?
A full turn cuts off the whole circumference, which has length \( 2\pi r \). So a full turn measures
Since a full turn is also \( 360^\circ \), we get \( 2\pi = 360^\circ \), or the version you should memorize:
From this, \( 1 \text{ rad} = \frac{180^\circ}{\pi} \approx 57.30^\circ \) and \( 1^\circ = \frac{\pi}{180} \text{ rad} \approx 0.01745 \text{ rad} \). A full turn is a little over 6.28 radians, because \( 2\pi \approx 6.283 \).
Here is a hands-on way to picture it. Take a piece of string as long as the radius and lay it along the circle again and again. Three pieces get you just short of halfway round (half the circle is \( \pi \approx 3.14 \) radii long), and a little over six pieces cover the whole circle. Each piece of string marks off exactly one radian at the center.
How do you convert between degrees and radians?
Think of \( \frac{\pi}{180} \) and \( \frac{180}{\pi} \) as conversion factors, just like converting inches to centimeters. Both are equal to 1 in disguise, because \( \pi \text{ rad} = 180^\circ \). Choose the one that cancels the unit you want to get rid of.
If you prefer one rule for both directions, use a proportion. An angle is the same fraction of a half turn in either unit, so
Fill in the measure you know and solve for the other. For example, \( \theta_{\text{deg}} = 72 \) gives \( \theta_{\text{rad}} = \frac{72}{180}\pi = \frac{2\pi}{5} \).
Degrees to radians
Multiply by \( \frac{\pi}{180} \) and simplify the fraction. For angles that are multiples of \( 15^\circ \) the result is a neat fraction of \( \pi \).
Example 1: Special angles in terms of π
Convert \( 60^\circ \), \( 135^\circ \), \( 210^\circ \) and \( 330^\circ \) to radians.
Solution.
Answer: \( \frac{\pi}{3} \), \( \frac{3\pi}{4} \), \( \frac{7\pi}{6} \) and \( \frac{11\pi}{6} \).
A quick way to simplify: divide both the angle and 180 by their greatest common divisor. For \( 135^\circ \) the divisor is 45, so \( \frac{135}{180} = \frac{3}{4} \).
Example 2: An angle that is not special
Convert \( 40^\circ \) to radians, both exactly and as a decimal.
Solution. \( 40 \cdot \frac{\pi}{180} = \frac{2\pi}{9} \approx 0.698 \).
Answer: \( \frac{2\pi}{9} \approx 0.698 \) rad.
Radians to degrees
Multiply by \( \frac{180}{\pi} \). If the angle contains \( \pi \), the \( \pi \)'s cancel and the answer is exact. If it does not, the answer is a decimal.
Example 3: Radians with π
Convert \( \frac{5\pi}{6} \), \( \frac{7\pi}{4} \) and \( \frac{3\pi}{2} \) to degrees.
Solution. Replace \( \pi \) by \( 180^\circ \), which is the same as multiplying by \( \frac{180}{\pi} \):
Answer: \( 150^\circ \), \( 315^\circ \) and \( 270^\circ \).
Example 4: Radians without π
Convert 2.5 radians and 1 radian to degrees, to two decimal places.
Solution.
Answer: \( 2.5 \text{ rad} \approx 143.24^\circ \) and \( 1 \text{ rad} \approx 57.30^\circ \).
What are the common angles in radians?
You will meet the same sixteen angles constantly in trigonometry, so it pays to know them without converting. They are built from two slices: \( \frac{\pi}{6} = 30^\circ \) and \( \frac{\pi}{4} = 45^\circ \).
- \( 30^\circ = \frac{\pi}{6} \), \( 45^\circ = \frac{\pi}{4} \), \( 60^\circ = \frac{\pi}{3} \), \( 90^\circ = \frac{\pi}{2} \)
- \( 120^\circ = \frac{2\pi}{3} \), \( 135^\circ = \frac{3\pi}{4} \), \( 150^\circ = \frac{5\pi}{6} \), \( 180^\circ = \pi \)
- \( 210^\circ = \frac{7\pi}{6} \), \( 225^\circ = \frac{5\pi}{4} \), \( 240^\circ = \frac{4\pi}{3} \), \( 270^\circ = \frac{3\pi}{2} \)
- \( 300^\circ = \frac{5\pi}{3} \), \( 315^\circ = \frac{7\pi}{4} \), \( 330^\circ = \frac{11\pi}{6} \), \( 360^\circ = 2\pi \)
A useful way to read these: the denominator tells you the slice size (6 means \( 30^\circ \) slices, 4 means \( 45^\circ \) slices, 3 means \( 60^\circ \) slices), and the numerator counts the slices. So \( \frac{5\pi}{6} \) is five \( 30^\circ \) slices, \( 150^\circ \). Since \( \pi = \frac{6\pi}{6} = \frac{4\pi}{4} = \frac{3\pi}{3} \), an angle one slice short of a half turn has a numerator one less than its denominator (\( \frac{5\pi}{6} \), \( \frac{3\pi}{4} \), \( \frac{2\pi}{3} \)), and an angle one slice past a half turn has a numerator one more (\( \frac{7\pi}{6} \), \( \frac{5\pi}{4} \), \( \frac{4\pi}{3} \)).
For an angle given as a plain decimal, find its quadrant by comparing it with the boundaries \( \frac{\pi}{2} \approx 1.57 \), \( \pi \approx 3.14 \), \( \frac{3\pi}{2} \approx 4.71 \) and \( 2\pi \approx 6.28 \). For instance, 4 rad lies between 3.14 and 4.71, so it is in the third quadrant, where sine and cosine are both negative. You can confirm it with a calculator in radian mode: \( \sin 4 \approx -0.757 \) and \( \cos 4 \approx -0.654 \).
Example 5: Exact trig values in radians
Find the exact values of \( \sin\frac{7\pi}{6} \), \( \cos\frac{5\pi}{3} \) and \( \tan\frac{3\pi}{4} \).
Solution. Convert, find the reference angle (the acute angle to the x-axis), then fix the sign from the quadrant.
- \( \frac{7\pi}{6} = 210^\circ \), in the third quadrant, reference angle \( 30^\circ \). Sine is negative there, so \( \sin\frac{7\pi}{6} = -\frac{1}{2} \).
- \( \frac{5\pi}{3} = 300^\circ \), in the fourth quadrant, reference angle \( 60^\circ \). Cosine is positive there, so \( \cos\frac{5\pi}{3} = \frac{1}{2} \).
- \( \frac{3\pi}{4} = 135^\circ \), in the second quadrant, reference angle \( 45^\circ \). Tangent is negative there, so \( \tan\frac{3\pi}{4} = -1 \).
Answer: \( -\frac{1}{2} \), \( \frac{1}{2} \) and \( -1 \).
The exact values for \( 30^\circ \), \( 45^\circ \) and \( 60^\circ \) come from the two special right triangles, explained in the lesson on SOHCAHTOA and right triangle trigonometry.
Coterminal and negative angles
Angles that differ by a whole number of full turns end in the same place; they are called coterminal, and they have the same sine, cosine and tangent. In radians you add or subtract multiples of \( 2\pi \) instead of \( 360^\circ \). A negative angle is measured clockwise.
Example 6: Reducing a large angle
Find the angle between 0 and \( 2\pi \) that is coterminal with \( \frac{17\pi}{6} \), and use it to find \( \sin\frac{17\pi}{6} \). Then find the positive angle coterminal with \( -\frac{\pi}{4} \).
Solution. Write \( 2\pi \) as \( \frac{12\pi}{6} \) and subtract: \( \frac{17\pi}{6} - \frac{12\pi}{6} = \frac{5\pi}{6} \), which is \( 150^\circ \). Its reference angle is \( 30^\circ \) and sine is positive in the second quadrant, so \( \sin\frac{17\pi}{6} = \sin\frac{5\pi}{6} = \frac{1}{2} \).
For the negative angle, add one full turn: \( -\frac{\pi}{4} + \frac{8\pi}{4} = \frac{7\pi}{4} \).
Answer: \( \frac{5\pi}{6} \) and \( \sin\frac{17\pi}{6} = \frac{1}{2} \); the angle \( -\frac{\pi}{4} \) is coterminal with \( \frac{7\pi}{4} \).
How do you find arc length and sector area with radians?
This is where radians pay off. A sector with central angle \( \theta \) (in radians) is the fraction \( \frac{\theta}{2\pi} \) of the whole circle. Multiply that fraction by the circumference \( 2\pi r \) and by the area \( \pi r^2 \):
Example 7: Arc length
Find the length of an arc of a circle of radius 8 cm with central angle \( \frac{3\pi}{4} \).
Solution. \( s = r\theta = 8 \cdot \frac{3\pi}{4} = 6\pi \approx 18.85 \) cm.
Answer: \( 6\pi \approx 18.85 \) cm.
Quick check: \( \frac{3\pi}{4} \) is three eighths of a full turn, and three eighths of the circumference \( 2\pi \cdot 8 = 16\pi \) is indeed \( 6\pi \).
Example 8: Sector area
Find the area of a sector of a circle of radius 6 m with central angle \( 120^\circ \).
Solution. Convert first: \( 120^\circ = \frac{2\pi}{3} \). Then
Answer: \( 12\pi \approx 37.70 \) m².
Example 9: The angle from the arc
An arc of length 15 cm lies on a circle of radius 6 cm. Find the central angle in radians and in degrees.
Solution. \( \theta = \frac{s}{r} = \frac{15}{6} = 2.5 \) rad, which is about \( 143.24^\circ \) (Example 4).
Answer: 2.5 rad, about \( 143.2^\circ \).
Example 10: Perimeter and area of a sector (exam level)
A sector of a circle has a perimeter of 20 cm and an area of 16 cm². Find the radius and the central angle.
Solution. The perimeter of a sector is two radii plus the arc: \( 2r + r\theta = 20 \). The area is \( \frac{1}{2}r^2\theta = 16 \). From the first equation \( r\theta = 20 - 2r \). Substitute into the second, written as \( \frac{1}{2}r \cdot (r\theta) = 16 \):
This factors as \( (r - 2)(r - 8) = 0 \). If \( r = 2 \), then \( r\theta = 16 \) and \( \theta = 8 \) rad; but a sector angle must be less than \( 2\pi \approx 6.28 \), so this case is impossible. If \( r = 8 \), then \( r\theta = 4 \) and \( \theta = 0.5 \) rad.
Answer: \( r = 8 \) cm and \( \theta = 0.5 \) rad (about \( 28.6^\circ \)).
Example 11: Area of a circular segment
A chord cuts off a segment from a circle of radius 10 cm; the chord subtends a central angle of \( \frac{\pi}{3} \). Find the area of the segment (the region between the chord and the arc).
Solution. Segment = sector minus triangle. The sector has area \( \frac{1}{2} \cdot 10^2 \cdot \frac{\pi}{3} = \frac{50\pi}{3} \). The triangle formed by the two radii and the chord has area \( \frac{1}{2} \cdot 10 \cdot 10 \cdot \sin\frac{\pi}{3} = 50 \cdot \frac{\sqrt{3}}{2} = 25\sqrt{3} \). So
Answer: \( \frac{50\pi}{3} - 25\sqrt{3} \approx 9.06 \) cm².
What is angular speed?
When something rotates, its angular speed \( \omega \) (omega) is the angle turned per unit of time, usually in radians per second. A point at distance \( r \) from the center then moves along its circle with linear speed
which is just \( s = r\theta \) divided by time. Rotation rates are often given in revolutions per minute (rpm); one revolution is \( 2\pi \) radians.
Every point of a rigid rotating object, such as a wheel, a fan or a merry-go-round, has the same angular speed, because they all turn through the same angle in the same time. Their linear speeds are different: a point twice as far from the center covers twice the distance in each turn, so it moves twice as fast. That is why the outside of a merry-go-round feels so much faster than the middle, and why \( v = r\omega \) has \( r \) in it.
Example 12: A bicycle wheel
A bicycle wheel of radius 0.35 m turns at 300 revolutions per minute. Find its angular speed in radians per second and the speed of the bicycle in meters per second and kilometers per hour (assume the wheel rolls without slipping).
Solution. \( 300 \) rev/min is \( 300 \cdot 2\pi = 600\pi \) rad per minute, which is \( \frac{600\pi}{60} = 10\pi \approx 31.42 \) rad/s. The speed of a point on the rim, and therefore of the bicycle, is
Multiply by 3.6 to convert m/s to km/h: \( 3.5\pi \cdot 3.6 \approx 39.6 \) km/h.
Answer: \( \omega = 10\pi \approx 31.42 \) rad/s; the bicycle moves at about 11.00 m/s, or about 39.6 km/h.
Example 13: The tip of a minute hand
The minute hand of a wall clock is 12 cm long. How far does its tip travel in 20 minutes, and what is its angular speed in radians per minute?
Solution. In 60 minutes the hand makes one full turn, \( 2\pi \) radians, so in 20 minutes it turns \( \frac{20}{60} \cdot 2\pi = \frac{2\pi}{3} \). The tip moves along an arc of length
The angular speed is \( \omega = \frac{2\pi}{60} = \frac{\pi}{30} \approx 0.105 \) rad per minute.
Answer: about 25.13 cm (exactly \( 8\pi \) cm); \( \omega = \frac{\pi}{30} \) rad/min.
How do you work with radians on a calculator and on graphs?
Every scientific and graphing calculator has a degree mode and a radian mode (often shown as DEG and RAD on the screen). The mode changes the meaning of every trig key: in degree mode \( \sin 30 = 0.5 \), while in radian mode the same keys compute the sine of 30 radians. Set the mode to match the units in the question before you start, and remember that inverse functions such as \( \sin^{-1} \) return their answer in the current mode too.
On graphs of trigonometric functions, the x-axis is almost always marked in radians. The sine curve starts at 0, peaks at \( \frac{\pi}{2} \), crosses the axis again at \( \pi \), reaches its minimum at \( \frac{3\pi}{2} \) and completes one period at \( 2\pi \).
Example 14: Solving a trig equation in radians
Solve \( \sin x = 0.6 \) for \( 0 \leq x < 2\pi \), giving answers to four decimal places.
Solution. In radian mode, \( \sin^{-1}(0.6) \approx 0.6435 \). This is the first-quadrant solution. Sine is also positive in the second quadrant, where the matching angle is \( \pi - x \):
Both lie between 0 and \( 2\pi \approx 6.2832 \), and there are no others in this interval, because sine is negative in the third and fourth quadrants.
Answer: \( x \approx 0.6435 \) or \( x \approx 2.4981 \).
In degrees, the same solutions would be about \( 36.87^\circ \) and \( 143.13^\circ \). The method is identical; only the "half turn" changes from \( 180^\circ \) to \( \pi \).
What are the most common mistakes with radians?
- Calculator in the wrong mode. \( \sin 30 \) in radian mode gives about \( -0.988 \), not 0.5. If a trig answer looks strange, check the DEG/RAD setting first.
- Replacing \( \pi \) by 180 in an angle with no \( \pi \). 2 rad is about \( 114.6^\circ \), not \( 360^\circ \).
- Using \( s = r\theta \) with degrees. For a \( 60^\circ \) arc of radius 3, the arc length is \( 3 \cdot \frac{\pi}{3} = \pi \), not \( 3 \cdot 60 = 180 \).
- Thinking a small number means a small angle. An angle of 3 rad is about \( 171.9^\circ \), almost a half turn. Radian values are small numbers for large angles.
- Not simplifying the fraction. \( \frac{90\pi}{180} \) should be written \( \frac{\pi}{2} \).
- Forgetting that the sector perimeter includes two radii. The arc alone is \( r\theta \); the perimeter is \( 2r + r\theta \).
- Mixing rpm and rad/s. Convert revolutions to radians (times \( 2\pi \)) and minutes to seconds (divide by 60) before using \( v = r\omega \).
FAQ about radians
How many degrees is 1 radian?
\( \frac{180}{\pi} \approx 57.2958 \) degrees, usually rounded to \( 57.3^\circ \). A radian is a bit less than a sixth of a turn, because a full turn is about 6.28 radians.
Is a radian a real unit?
Yes. The radian is the SI unit of plane angle, but because it is defined as a ratio of two lengths it is dimensionless. That is why it is often dropped: \( \theta = 2 \) means 2 radians, and \( v = r\omega \) gives meters per second without a leftover "radian".
Why do mathematicians prefer radians to degrees?
Formulas become simpler. Arc length is \( s = r\theta \) with no extra constant, and for small angles \( \sin\theta \approx \theta \): for example \( \sin 0.1 \approx 0.0998 \). In calculus the derivative of \( \sin x \) is \( \cos x \) only when \( x \) is in radians; in degrees an awkward factor of \( \frac{\pi}{180} \) appears. Graphs of \( y = \sin x \) also use radians on the x-axis, so one period is \( 2\pi \approx 6.28 \) units long.
How do I convert degrees and minutes to radians?
First turn the minutes into a decimal part of a degree (1 minute is \( \frac{1}{60} \) of a degree), then convert as usual. For example, \( 25^\circ 30' = 25.5^\circ \), and \( 25.5 \cdot \frac{\pi}{180} \approx 0.4451 \) rad.
Where are radians used outside math class?
Almost everywhere angles meet rates or lengths. Physics describes rotation with angular velocity in radians per second, waves and oscillations use radians inside \( \sin(\omega t) \), and engineering and computer graphics software usually expect angles in radians (programming functions such as sin and cos in most languages take radians). Degrees remain common for everyday directions, maps and building plans.
Should I leave π in my answer?
If the question says "exact" or "in terms of \( \pi \)", yes: \( \frac{3\pi}{4} \) or \( 6\pi \) cm. Otherwise give a decimal rounded as asked. Both \( \frac{\pi}{3} \) and 1.047 describe the same angle.
Cheat sheet
- \( \pi \text{ rad} = 180^\circ \); \( 2\pi \text{ rad} = 360^\circ \).
- Degrees to radians: \( \times \frac{\pi}{180} \). Radians to degrees: \( \times \frac{180}{\pi} \).
- \( 1 \text{ rad} \approx 57.30^\circ \); \( 1^\circ \approx 0.01745 \) rad.
- Key angles: \( \frac{\pi}{6} = 30^\circ \), \( \frac{\pi}{4} = 45^\circ \), \( \frac{\pi}{3} = 60^\circ \), \( \frac{\pi}{2} = 90^\circ \), \( \pi = 180^\circ \), \( \frac{3\pi}{2} = 270^\circ \).
- Coterminal angles differ by multiples of \( 2\pi \).
- Arc length \( s = r\theta \); sector area \( A = \frac{1}{2}r^2\theta \); sector perimeter \( 2r + r\theta \) (\( \theta \) in radians).
- Segment area \( = \frac{1}{2}r^2(\theta - \sin\theta) \).
- Angular speed: \( v = r\omega \); 1 revolution \( = 2\pi \) rad.
Practice
These problems check your answer instantly and come with a hint and a full solution. They are written in degrees; converting each angle to radians is good extra practice.
- How high does the ladder reach? uses the angle \( 60^\circ = \frac{\pi}{3} \).
- Angle of a kite string has an answer that is a special angle; give it in radians too.
- Exact value of an expression with special angles practices the values for \( \frac{\pi}{6} \), \( \frac{\pi}{4} \) and \( \frac{\pi}{3} \).
- Tangent of an obtuse angle from its sine works with an angle between \( \frac{\pi}{2} \) and \( \pi \).
- Sum of the solutions of a quadratic in sin x asks for a sum of angles in degrees; the same sum in radians is \( \frac{7\pi}{2} \).
For more, see all trigonometry practice problems, the lesson on the law of sines and law of cosines, or browse the other English lessons.